Wireless Baby Audio Monitor Two-Way Talk Infant Intercom Night Light Home Security Device Ready Stock

Feature: 

1. When the noise in the baby room is lower than 40db for more than 20 seconds, vox will be activated and the display will eliminate slight background noise. 

2. Until the noise exceeds 40db, the monitor will be awakened and it accurately lets you know when your baby makes any sound. 

3. Two-way intercom, 2.4GHz dedicated signal, standby up to 20 hours. 

4. Convenient to carry, the parent unit can be charged and carried, 1000ft outdoor/160ft indoor. 

5. The night light can be remotely controlled, making it more practical and convenient to use. 

Specification: 

Type: Infant Sound Monitor

Material: ABS+ Electronic Components 

Parent Unit Battery Model: lithium battery (included) 

Parent Unit Battery Capacity: 750mAh 

The Baby unit does not contain batteries,Connect wire when in Use

Sound Monitor Size: Approx. 10.5 x 7 x 5cm/4.1 x 2.8 x 2in(parent unit) 

Sound Monitor Size: Approx. 10.5 x 7 x 5cm/4.1 x 2.8 x 2in  (Baby unit) 

For best results, please charge the parent unit before use. 

After initial charge, charge normally as required. 

The parent unit can operate normally with the power adapter inserted into the device or with the battery Fully Charge for wireless. 

The baby unit is not rechargeable and need to connect by adapter to power on all the time.

1. Plug the adapter into a power outlet. Connect the small end of the USB power cord to the parent unit of the DC jack. The power LED indicator will light up in red. 

2. Press and hold the power on/off button for 2 seconds to turn on the parent unit. The power LED indicator will illuminate green to indicate Device is power on.

3. The LED Indicator will flash when in Charge mode and the light will stay still when the battery fully charge.

4. Once both the baby unit and the parent unit are opened. The parent unit will transmit the audio captured by the baby unit. 

5. If there is no connection or you are out of range, the audio will be turned off and the parent unit will beep quickly after failing to re-establish the link. Move the parent unit closer to the baby unit until the link is re-established. 

6. Press and hold down the power button to turn off the parent unit. 

Package List: 

2 x Sound Monitor

2 x USB Cable

1 x Plug

1 x Manual 

Note: 

Do not expose the baby monitor to extreme cold, high temperature, humidity or direct sunlight. 

Do not put the product near the heating source. 

Do not expose the battery to excessive heat, bright sunlight or flame. 

Do not immerse the parent unit and infant unit in water. Do not wash them under the tap.

#babyaudiomonitor #babysafety #babyaudio #babydetector